NISSAN SKYLINE STEREO REMOVAL GUIDE

NISSAN SKYLINE R33
1993-1998
REMOVAL INSTRUCTIONS:
FIRST REMOVE THE ASHTRAY & TAKE OUT THE TWO SCREWS LOCATED BEHIND, ONCE REMOVED UN CLIP THE GEAR LEVER SURROUND & SLIDE BACK TO DISENGAGE FROM THE TOP DASH PANEL, NOW YOU CAN ACCESS THE THREE SCREWS AT THE BOTTOM OF THE LARGE PANEL, NEXT USE THE ADJUSTER LEVER TO LOWER THE STEERING WHEEL, WITH ALL THE SCREWS REMOVED START AT THE BOTTOM & WORK UPWARDS DISENGAGING THE METAL CLIPS. ONCE THE TRIM PANEL IS RELEASED AROUND THE STEREO WORK ACROSS THE STEERING WHEEL & AROUND THE DRIVERS SIDE HEATER VENT, NOW YOU CAN ACCESS THE FOUR SCREWS HOLDING THE STEREO IN PLACE.
EXTRA INFORMATION:
AN EARTH CONNECTION WILL NEED CONNECTING TO THE AFTERMARKET HARNESS LEAD.
Picture
DIFFICULTY RATING:
TOOLS REQUIRED:
Picture
TRIM REMOVAL TOOL
Picture
PHILLIPS SCREWDRIVER
ACCESS REQUIRED:
Picture
WIRING HARNESS
Picture
FASCIA ADAPTER
Picture
AERIAL ADAPTER
 Difficulty Key:
* Straightforward install requiring little or no trim removal & minimal fitting skill/experience.
** More complex installation including bolt-in Head Unit &/or trim removal. 
*** Complex installation including Hard Wiring, bolt-in Head Unit & extensive trim removal.
 Where to find the Correct Fascia & Harness Adapters:

              - ArmourAutomotive.com (Autoleads)
              - Connects2.co.uk